Dini Argeo CPX Low Profile Compression Load Cell

Dini Argeo ATEX CPX Low Profile Compression Load Cell

By Dini Argeo

The Dini Argeo CPX low-profile compression load cell with ATEX certification provides a robust, accurate, and space-saving weighing solution for tanks and hoppers operating in potentially explosive industrial environments. Its stainless steel construction and high IP protection, combined with individual CCATEX certification, ensure reliable and safe performance in demanding and hazardous conditions.

Model
£256.00
Product Information

Features:

  • Wide Capacity Range: Available in capacities from 250kg to 100000kg, catering to a broad range of weighing needs for tanks and hoppers.
  • OIML C3 Approved (from 2500kg to 12500kg): Ensures accurate and reliable weighing performance for approved applications within the specified capacity range.
  • Low Profile Design: Minimises the installation height, making it suitable for space-constrained applications.
  • Great Resistance to Lateral Forces: Ensures accurate weighing even when subjected to off-axis loads.
  • Stainless Steel Construction: Offers excellent durability and corrosion resistance, making it suitable for demanding industrial environments.
  • IP68/IP69K Protection: Provides the highest level of protection against dust and water ingress, including high-pressure, high-temperature washdown, ensuring reliable operation in harsh conditions.
  • Shielded Connection Cable: Minimises electromagnetic interference for stable and accurate signal transmission. Cable length varies by capacity: 5 m for 250-5000 kg versions, 10 m for 7500-100000 kg versions.

ATEX Version:

This model of the Dini Argeo CPX load cell is an ATEX certified version, making it suitable for use in hazardous areas with the following protection methods according to the CCATEX certificate:

  • ATEX II 1G Ex ia IIC T6 (Ta -20÷+40°C) Ga
  • ATEX II 1G Ex ia IIC TX (Ta -20÷+65°C) Ga
  • ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+40°C) Da IP65
  • ATEX II 1D Ex ta IIIC TX°C (Ta -20÷+65°C) Da IP65

IMPORTANT NOTE: The ATEX certificate applies to the single load cell unit. For weighing systems utilising multiple load cells, it is necessary to order an individual ATEX certificate for each load cell within the system.
Specification

Minimum load cell verification interval: Vmin = EMax / 10000

Full Scale Output: 2mV/V +/- 0,5%

Non-Repeatability: 0,01% F.S.

Combined Error 0,05%

Temperature effect on zero: 0,02% / 10°C

Temperature effect on full scale output: 0,02% / 10°C

Compensated Temperature Range: -10°C/+40°C

Operating Temperature Range: -20°C/+60°C

Creep error after 30 minutes: 0,02% F.S.

Maximum tolerated excitation voltage: 15 Vdc

Input Resistance: 750 ± 10 Ohm

Output Resistance: 700 ± 5 Ohm

Zero Balance: +/-1% F.S.

Insulation Resistance: >5000 MOhm

Safe Overload: 120% F.S.

4-wire shielded cable, 5 mm diameter:
- 5 m long for CPX 250...5000 versions;
- 10 m long for CPX 7500...100000 versions.
Downloads

Please click here for the Dini Argeo ATEX CPX Low Profile Compression Load Cell datasheet
View details