"E-Belt": Software For 3590E/CPWE Indicators For Management Of Continuous Dosages on Belt

£47.00 £52.00

DOSAGE FUNCTIONS

  • 2 selectable operation modes:
    - Instantaneous reading of the flow, in kg/h or t/h with displaying of the status of the system and of the dosed total.
    - Adjustment of the dosage hourly flow, in function of the pre-setted target, with PID algorithm.
  • Visualisation of the hourly flow graph and wide range of data displayed on the display.
  • Calibration of the flow reading function, for controlling the dosage performances.
  • Reading filter of the hourly flow with configurable incidence and speed depending on the system.
  • Programmable dosage target upon weight or upon time, with relative contact.
  • Programmable start dosage delay, for synchronisation of various E-BELT systems in the dosage of material mixtures.
  • Management of the slow flow with programmable activation threshold, for more precise dosages.
  • Management of the dosage total under way and general total of dosages, printable and clearable independently from each other.
  • Management of the automatic dosage from remote master or through Profibus DP or Modbus RTU protocol.
  • Printing of the dosage data and the total.
  • Completely programmable printouts, for compatibility with any ASCII printer manageable through the serial port.

DATABASES

  • Database of 100 products with: 5 alphanumeric description, hourly flow target, weight dosage target and initial value analogue output.
  • Manual programming of the products or throught PC software (Dinitools).

I/O FUNCTIONS

  • Activation cycle, START / RESTART dosage, PAUSE / RESET cycle and unloading of the belt out of the cycle, through external inputs.
  • Impulse counter of the accumulated quantity through relay contact, for direct communication with PLC or external devices.
  • Relay contacts dedicated for the complete management of the alarms and the blocks for off weight, off flow and belt side-slipping.
  • Input and output with programmable functions.
  • 16 bit analogue input (optional) for programming the hourly flow target.
  • 16 bit analogue output (optional) proportional to the hourly flow (lector mode) or programamble for regulating the dosage speed (regulator mode).
  • Serial communication protocol for programming the products and reading the cycle status.
  • SYSWAY and MODBUS communication protocol for programming the dosage data and managing the cycle.
  • External Profibus interface (optional), for programming the dosage data and managing the cycle.
  • Optional Bluetooth connection, for quick wireless programming of the product, through PC or PDA.

SYSWAY, MODBUS, PROFIBUS FUNCTIONS

  • READING THE DATA:
    - net weight
    - instantaneous flow
    - value of the instantaneous pid
    - partial total
    - general total
    - status of the optoisolated inputs
    - status of the optoisolated outputs
    - flow target (for the controller modes)
    - minimum flow, maximum flow
    - dosage time
    - target to be dosed
    - set point enabling/disabling value
    - status of the scale
  • AVAILABLE COMMANDS:
    - dosage Start/Stop/Reset
    - programming of flow target, target to be dosed and dosage time
    - print format
    - reset of accumulated totals
    - setpoint programming

Please click here for the "E-Belt": Software For 3590E/CPWE Indicators For Management Of Continuous Dosages on Belt Datasheet...