DGT60 MAXI "GOLIAH" Weight Indicator-Repeater

£559.00 £620.00

Model

MAIN FEATURES

  • Functional 5-key waterproof keypad.
  • Large 6-digit display, 60 mm high, with very efficient SMD LEDs (software
    adjustment of the brightness intensity), complete of 6 LEDs for indication of
    active functions, visible from over 25 m, with viewing angle up to 120° and with
    power up to 750 mcd.
  • IP68 stainless steel case complete with wall fixing bracket.
  • Dimensions: 410 x 67 x 165 mm.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with
    DINI TOOLS.
  • Max. 10.000e or multi-range 2 x 3000e @ 0,3 µV/d in CE-M approved version
    for legal for trade use.
  • Max. 800.000d viewable with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearization points with DINITOOLS.
  • A/D 24 bit sigma-delta 4-channel conversion, max.200 conv./sec. with
    automatic selection.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Management of a weighing system with up to 4 cells with digital equalisation or
    management of up to 4 independent weighing systems.
  • Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier.
  • Available as Scale or as Repeater version.
  • Fitted with an air valve for regulating the humidity and the pressure inside
    the indicator.

MAIN CERTIFICATIONS

  • EC Type Approval (EN45501)
  • OIML R76
  • OIML R61 - MID

I/O SECTION

  • RS232/C bidirectional port configurable for connection to printer, PC,
    or other external units.
  • RS485 bidirectional port configurable for connection to PC, PLC, or other
    external units.
  • PROFIBUS serial interface (DGT60PB model).
  • 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with
    configurable functions.
  • 2 optoisolator photo couplers: 12÷24 Vdc, 5 mA min - 20 mA max, with
    configurable functions.
  • 16-bit analogue output (DGT60AN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice;
    maximum applicable voltage: 350 Ohm; minimum applicable voltage
    resistance: 10k ohm.

DGT60R REPEATER FUNCTIONS

  • Version with specific program for use of the indicator as a universal weight repeater or as a
    multi- scale repeater (MASTER) in combination with DFW/DGT/MCW.
  • FUNCTIONING MODES:
    - Multi-scale repeater (MASTER):
    Function which allows to repeat up to 32 independent scales, with the possibility
    of managing their functions, or displaying and printing the sum of the weighs of
    all the scales.
    - UNIVERSAL weight repeater:
    Function which allows to repeat the weight of any scales, through the configuration
    of the input string.

DGT60BC / DGT60AN / DGT60PB FUNCTIONS

  • THROUGH KEYBOARD:
    Zeroing; Semi automatic and presettable tare, print and/or data transmission; ON/Stand-by.
  • SELECTABLE:
    High Resolution Weighing x 10; Net/Gross or lb/kg conversion; Weighs totalisation; Formulation; Approved transmission of the weight to PC/PLC (with ALMEM Alibi memory option); Counting; In/Out Truck weighing; Hold e Peak.
  • EXTERNAL INPUT:
    Simulation of key pressure; Keyboard lock.
  • MOSFET OUTPUT:
    Set Point Control on the weight, either positive (in loading) or negative (in unloading), or on the pieces (counting mode), with programmable enabling/disabling thresholds, as direct check or upon weight stability.
  • SERIAL PORTS:
    On all models: Reading of the net, gross, and tare weights; Clearing; Semi automatic and presettable tare; Scale switch; Setting of outputs activation thresholds; Reading/Writing of Alibi Memory.
    DGT60BC and DGT60AN models: Reading of microvolts or ADC converter for all the channels; Message display; Printing; Setting of APW in counting mode; Simulation of key pressure; MODBUS serial protocol.
  • THROUGH 16 bit ANALOGUE OUTPUT (DGT60AN):
    Analogue output proportional to the net or gross weight, either positive (in loading) or negative (in unloading).

Click here for data sheet.....