DEVICENET interface for weighing scales network or single weighing scale

£601.00 £667.00

DEVICENET CONVERTER FOR SINGLE WEIGHING SCALE

  • By connecting the DEVICENET to a single weighing scale or by selecting one from the scales network, the DEVICENET protocol transmits the following data and controls:
    - NET, GROSS and TARE weight
    - Weight status (for example; positive, negative, stable, unstable)
    - Error condition (es. overload, underload)
    - DIGITAL INPUT status
    - RELAY OUTPUT status
    - SETPOINT output writings
    - Aliby Memory
    - Calibration
    - Configuration SETUP

DEVICENET HUB FUNCTION, UP TO 16 WEIGHING SCALES

  • This configuration permits to monitor simultaneously all the data of the weighing scales network by DEVICENET protocol.
    In detail:
    - NET weight and GROSS weight of the scales
    - Weight status (for example, positive, negative, stable, unstable)
    - RELAY OUTPUT status
    - DIGITAL INPUT status
    - Error condition (e.g. overload, underload)

MAIN FEATURES OF DEVICENET FOR WEIGHING SCALES

  • Hub function for a simultaneous check of up to 16 weighing scales.
  • DEVICENET slave port.
  • ABS case for panel mounting on DIN bar.
  • MAC ID from 0 to 63.
  • Baud Rate from 125KBaud to 500KBaud.
  • Suitable to function with DGT1S weight transmitter. Quick configuration from the transmitter programming menu.
  • Serial port RS485 (from 9600 to 115200 baud), with "quick connect" system for a fast connection.
  • Power source: 12-24Vdc.

Please click here for the DEVICENET interface Datasheet...