CANOPEN interface for single scale or weighing scales network

£601.00 £667.00

FUNCTIONS FOR HUB CANOPEN UP TO 16 WEIGHING SCALES

  • This configuration allows to check, at the same time, all the data of the weighing scales network by CANOPEN protocol.
    In detail:
    - NET weight and GROSS weight of the scales
    - Weight status (for example, positive, negative, stable, unstable)
    - Error condition (es. overload, underload)
    - DIGITAL INPUT status
    - RELAY OUTPUT status

CANOPEN CONVERTER FOR SINGLE WEIGHING SCALE

  • By connecting the CANOPEN to the weighing scale or by selecting one from the scales network, the CANOPEN protocol transmits specific data and controls:
    - NET weight, GROSS weight and TARE of the weighing scale
    - Weight status (for example; positive, negative, stable, unstable)
    - Error condition (es. overload, underload)
    - DIGITAL INPUT status
    - RELAY OUTPUT status
    - SETPOINT output writings
    - Aliby Memory
    - Calibration
    - Configuration SETUP

CANOPEN FOR WEIGHING SCALES: MAIN FEATURES

  • Hub function for a simultaneous check of up to 16 weighing scales.
  • CANOPEN slave port.
  • ABS case for panel mounting on DIN bar.
  • Indexing from 1 to 127.
  • Baud Rate from 10KBaud to 1MBaud.
  • Suitable to function with DGT1S weight transmitter. Quick configuration from the transmitter programming menu.
  • Serial port RS485 (from 9600 to 115200 baud), with "quick connect" system for a fast connection.
  • Power source: 12-24Vdc.

Please click here for the CANOPEN interface for single scale or weighing scales network Datasheet...