{"title":"Vision Inspection Systems","description":"\u003ch2\u003eVision Inspection Systems – Automated Packaging Quality Control for Food \u0026amp; Industrial Production\u003c\/h2\u003e\u003cp\u003eOur vision inspection systems are advanced machine vision solutions designed to verify packaging integrity, detect surface defects, and perform label, print, and barcode inspection at production line speeds. Powered by TriVision’s leading vision technology, each system in this range is engineered for direct integration into packaging and production lines — from thermoformers and conveyors to standalone turnkey installations — delivering reliable, consistent quality control with a minimal footprint and maximum throughput.\u003c\/p\u003e\u003cp\u003eUnlike manual inspection, which is inherently inconsistent and resource-intensive, automated vision inspection systems operate continuously and without fatigue, identifying label defects, print errors, seal contamination, surface anomalies, and barcode failures in real time. With cloud-based Production Intelligence, Industry 4.0 connectivity, and intuitive operator interfaces, these systems provide the quality data manufacturers need to reduce waste, minimise false rejects, and meet the demands of food safety, retailer audit, and production efficiency targets.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLabel and artwork verification\u003c\/strong\u003e — confirms label position, print accuracy, expiry dates, and artwork compliance across primary and secondary packaging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrint and barcode inspection\u003c\/strong\u003e — detects print defects, missing content, and barcode readability failures at line speed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeal and surface inspection\u003c\/strong\u003e — identifies seal contamination, mould spots, surface residues, and foreign material using standard or hyperspectral imaging\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360-degree and all-sides coverage\u003c\/strong\u003e — multi-camera configurations inspect every face of bottles, cans, jars, and blocks in a single pass\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOPC UA and REST connectivity\u003c\/strong\u003e — Industry 4.0-ready integration with MES, ERP, and factory data systems across all systems\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCloud-based Production Intelligence\u003c\/strong\u003e — trend analysis, root cause investigation, and performance benchmarking across shifts and sites\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScalable configurations\u003c\/strong\u003e — conveyor-mount, integrated, and turnkey options to suit any packaging line layout or footprint requirement\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStainless steel construction\u003c\/strong\u003e — IP 65, IP 66, IP 67, and IP 69K rated options for food, pharmaceutical, and washdown environments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eSystems in This Range\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisioPointer®\u003c\/strong\u003e — in-line vision inspection for transparent and semi-transparent sealed packaging, positioned directly within the packaging machine\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisioCompact®\u003c\/strong\u003e — compact standalone inspection unit for thermoformed and tray-sealed packaging with a built-in conveyor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisioLine®\u003c\/strong\u003e — standardised vision inspection integrated into thermoformers, supporting 2–6 GigE line scan cameras at up to 10 m\/min\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHyperPointer®\u003c\/strong\u003e — hyperspectral imaging system for reliable seal contamination detection in non-transparent and printed packaging films\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e360 Inspector®\u003c\/strong\u003e — eight-camera system providing complete 360-degree and top\/bottom inspection of bottles, cans, and jars\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmartInspector®\u003c\/strong\u003e — plug-and-play conveyor-mount system for essential label, print, and barcode inspection on any packaging line\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVisioOne®\u003c\/strong\u003e — single-camera entry-level system for label verification on primary and secondary packaging with fast format changeover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheeseInspector® Rectangular\u003c\/strong\u003e — turnkey all-sides mould and plastic detection system for rectangular cheese blocks at up to 15 blocks per minute\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAll systems are supplied by TriVision, a leading machine vision specialist, and are available with full integration support and commissioning. Contact our team to discuss the right system for your production line, packaging format, and inspection requirements.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eWhat types of defects can vision inspection systems detect?\u003c\/h4\u003e\u003cp\u003eDepending on the system, vision inspection systems in this range can detect label and artwork defects, incorrect or missing print, unreadable barcodes, seal contamination, surface mould or residues, foil remnants, and structural defects such as dents or seam irregularities. Systems using hyperspectral imaging (HyperPointer®) can detect low-contrast contamination through printed or non-transparent films that standard RGB cameras cannot resolve.\u003c\/p\u003e\u003ch4\u003eWhich system is right for my packaging line?\u003c\/h4\u003e\u003cp\u003eThe right system depends on your packaging format, line speed, inspection requirements, and available footprint. Thermoformer integration points towards VisioLine® or VisioPointer®. Conveyor-mount requirements suit SmartInspector® or VisioOne®. Round product lines should consider 360 Inspector®. Non-transparent or printed packaging with seal contamination risk is best served by HyperPointer®. Contact us with your line specifications and we can recommend the appropriate configuration.\u003c\/p\u003e\u003ch4\u003eCan vision inspection systems integrate with my existing factory systems?\u003c\/h4\u003e\u003cp\u003eYes. All TriVision systems in this range support OPC UA and REST communication protocols over Gigabit Ethernet, enabling integration with MES and ERP platforms. Cloud-based backup and Production Intelligence are also available, providing centralised quality data and performance monitoring across multiple lines or production sites.\u003c\/p\u003e\u003ch4\u003eWhat environments are these systems rated for?\u003c\/h4\u003e\u003cp\u003eSystems are available in IP 65, IP 66, IP 67, and IP 69K rated configurations with stainless steel AISI 304 or 316 construction, making them suitable for food production, pharmaceutical manufacturing, dairy, and washdown environments. Specific ratings vary by system — refer to individual product pages for enclosure details.\u003c\/p\u003e\u003ch4\u003eDo the systems support fast format changes?\u003c\/h4\u003e\u003cp\u003eYes. All TriVision vision systems are designed for swift and effortless format changes, minimising production downtime during product transitions. SmartInspector® and VisioOne® in particular are designed for quick changeover via brackets or stands on existing conveyors, while larger integrated systems support recipe-based product switching through the HMI.\u003c\/p\u003e","products":[{"product_id":"visiopointer®-vision-inspection-system","title":"VisioPointer® Vision Inspection System","description":"\u003ch2\u003eVisioPointer®: High-Speed Vision Inspection for Food and Pharma Packaging\u003c\/h2\u003e\n\n\u003cp\u003eThe VisioPointer® from TriVision is a high-speed vision inspection system designed for thorough quality control of food and pharmaceutical packaging. Built as a compact turnkey solution, VisioPointer® combines seal, label and artwork, print, and barcode inspection in a single unit, enabling manufacturers to detect defects reliably at production speed and reduce downstream quality failures.\u003c\/p\u003e\n\n\u003ch3\u003eComprehensive Inspection in a Single Unit\u003c\/h3\u003e\n\u003cp\u003eVisioPointer® is available in multiple configurations, supporting seal inspection, label and artwork verification, print quality assessment, and barcode reading. Top, bottom, and side cameras provide complete package coverage in one pass, removing the need for separate inspection stations and reducing system complexity on the production line.\u003c\/p\u003e\n\n\u003ch3\u003eIntuitive Software with Integrated Data Analytics\u003c\/h3\u003e\n\u003cp\u003ePowered by TriVision's intuitive vision software, VisioPointer® makes it straightforward for operators to monitor production and make real-time adjustments. The integrated data analytics tool enables manufacturers to identify trends, conduct root cause analyses, and implement early error detection — converting inspection data into actionable production intelligence.\u003c\/p\u003e\n\n\u003ch3\u003eTurnkey Construction for Fast Integration\u003c\/h3\u003e\n\u003cp\u003eVisioPointer® delivers a complete turnkey installation comprising sensor, camera array, lighting, built-in conveyor, ejector mechanism, and operator panel in a single stainless steel enclosure. With an IP 65 rating and construction in AISI 316 and AISI 304 stainless steel, the system is suited to hygienic food and pharma environments and supports conveyor speeds up to 800 mm\/s.\u003c\/p\u003e\n\n\u003ch3\u003eIndustrial Computing and Open Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe built-in industrial PC running Windows 11 IoT Enterprise LTSC ensures stable, long-term operation. Gigabit Ethernet and Digital I\/O connectivity, combined with OPC UA and REST communication protocols, enable seamless integration with existing factory data systems, MES platforms, and statistical process control software.\u003c\/p\u003e\n\n\u003ch2\u003eOptimise Quality Control Across Every Package\u003c\/h2\u003e\n\u003cp\u003eBy consolidating multiple inspection functions into one compact platform and pairing them with TriVision's analytics toolset, VisioPointer® gives manufacturers the visibility and control to maintain consistent packaging quality, reduce waste, and meet the demands of regulated food and pharma production environments.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56128297238850,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/VisioPointer_Shield_closed_overview_800.png?v=1788792424"},{"product_id":"visiocompact®-vision-inspection-system","title":"VisioCompact® Vision Inspection System","description":"\u003ch2\u003eVisioCompact®: Complete Vision Inspection in a Compact Footprint\u003c\/h2\u003e\n\n\u003cp\u003eThe VisioCompact® from TriVision is a self-contained vision inspection system that delivers comprehensive packaging quality control within a minimal production footprint. Combining a built-in conveyor, operator panel, and optional ejector mechanism in a single stainless steel enclosure, VisioCompact® eliminates the need for separate peripheral equipment and simplifies line integration without compromising inspection capability.\u003c\/p\u003e\n\n\u003ch3\u003eAbove and Below Conveyor Inspection Coverage\u003c\/h3\u003e\n\u003cp\u003eVisioCompact® supports camera setups both above and below conveyor level, enabling complete top and bottom package inspection in one pass. Available in multiple configurations, the system adapts to a range of packaging formats and inspection requirements, making it a practical choice for food and pharmaceutical producers who need flexibility without additional floor space.\u003c\/p\u003e\n\n\u003ch3\u003eCompact Construction Built for Hygienic Environments\u003c\/h3\u003e\n\u003cp\u003eThe enclosure is constructed from stainless steel AISI 316 and rated IP 65, providing reliable protection in wet or washdown environments. The conveyor handles products up to 100H × 280W × 280D mm at speeds up to 800 mm\/s, with the conveyor level set at 900 mm and adjustable by ±50 mm to suit existing line heights. An optional mechanical pusher ejector mechanism handles automatic rejection of non-conforming products.\u003c\/p\u003e\n\n\u003ch3\u003eIntuitive Software and Open Connectivity\u003c\/h3\u003e\n\u003cp\u003ePowered by TriVision's vision software and running on Windows 11 IoT Enterprise LTSC, VisioCompact® provides a straightforward operator experience through a 15.6-inch full HD multi-touch panel. Gigabit Ethernet and Digital I\/O connectivity, combined with OPC UA and REST communication protocols, enable integration with factory data systems and MES platforms across all supported languages.\u003c\/p\u003e\n\n\u003ch2\u003eStand-Alone Simplicity Without Compromise\u003c\/h2\u003e\n\u003cp\u003eWith its built-in conveyor, ejector, and operator panel consolidated into one compact unit, VisioCompact® reduces installation complexity and total cost of ownership. It is the practical choice for manufacturers who require reliable, software-driven vision inspection without dedicating significant line space or infrastructure.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56128381845826,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/VisioCompact_-_Overview_HIGH_800.png?v=1788790734"},{"product_id":"visioline-®-integrated-vision-system-for-packaging-inspection","title":"VisioLine® Vision Inspection System","description":"\u003ch2\u003eVisioLine®: Integrated Vision Inspection for Thermoforming Packaging Lines\u003c\/h2\u003e\n\n\u003cp\u003eThe VisioLine® from TriVision is a standardised vision inspection system designed for direct integration into thermoforming machines. By embedding seal, label and artwork, print, and barcode inspection within the thermoformer itself, VisioLine® eliminates the need for a separate downstream inspection station — saving valuable factory floor space and enabling inspection at exactly the right point in the process.\u003c\/p\u003e\n\n\u003ch3\u003ePurpose-Built for Flexible Foil and Thermoformed Packaging\u003c\/h3\u003e\n\u003cp\u003eVisioLine® is the preferred solution for inspecting packages made from thin, flexible foil. Seal inspection must be performed before the punching process to achieve reliable defect detection, and VisioLine® is positioned precisely within the thermoformer to fulfil this requirement. With support for 2 to 6 GigE Line Scan cameras, the system accommodates a wide range of packaging formats and inspection coverage requirements.\u003c\/p\u003e\n\n\u003ch3\u003eHigh-Speed Inspection with Format Flexibility\u003c\/h3\u003e\n\u003cp\u003eVisioLine® inspects at peak indexing speeds of up to 1,200 mm\/s and throughput of up to 200 packs or 10 m\/min, making it well suited to demanding, high-speed production environments. The system supports fast and effortless format changes, ensuring production flexibility is maintained without extended downtime during product changeovers.\u003c\/p\u003e\n\n\u003ch3\u003eModular Construction for Machine Integration\u003c\/h3\u003e\n\u003cp\u003eThe system comprises a main camera and lighting housing, a separate electrical cabinet, and an HMI panel. Customised mounting brackets fit the housing directly to the packaging machine, while the IP 66-rated cabinet is placed independently. The 15.6-inch full HD multi-touch panel can be integrated into the cabinet or mounted directly on the packaging machine, depending on the installation layout.\u003c\/p\u003e\n\n\u003ch3\u003eIntuitive Software and Open Connectivity\u003c\/h3\u003e\n\u003cp\u003eRunning on Windows 11 IoT Enterprise LTSC with TriVision's vision software, VisioLine® provides an intuitive operator interface for monitoring production and making real-time adjustments. OPC UA and REST API communication protocols, combined with Gigabit Ethernet and Digital I\/O, enable seamless integration with MES platforms and factory data systems for traceability, early error detection, and root cause analysis.\u003c\/p\u003e\n\n\u003ch2\u003eInline Quality Control Without the Footprint\u003c\/h2\u003e\n\u003cp\u003eBy integrating vision inspection directly within the thermoforming machine, VisioLine® delivers thorough packaging quality control at production speed — without the additional floor space, handling steps, or infrastructure of a standalone inspection unit.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56134959104322,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/Inline_Inspector.6_800.png?v=1788791770"},{"product_id":"hyperpointer®-an-in-line-vision-solution-for-hyperspectral-seal-inspection","title":"HyperPointer® Hyperspectral Vision Inspection System","description":"\u003ch2\u003eHyperPointer®: Hyperspectral Seal Inspection for Non-Transparent Packaging\u003c\/h2\u003e\n\n\u003cp\u003eThe HyperPointer® from TriVision is an in-line vision inspection system that uses hyperspectral imaging (HSI) to deliver reliable quality control of non-transparent packaging. Designed for plastic and paperboard trays, pots, and containers, HyperPointer® performs thorough seal inspection where standard RGB vision systems are unable to achieve consistent, reliable results — regardless of packaging material, layout, or format size.\u003c\/p\u003e\n\n\u003ch3\u003eWhere Standard Vision Systems Fall Short\u003c\/h3\u003e\n\u003cp\u003eConventional vision systems capture images across three wavelength ranges (RGB), detecting only what the human eye can see. This creates significant limitations when inspecting non-transparent packaging films or when there is insufficient contrast between a contaminant and the film material. HyperPointer® addresses these limitations directly by capturing data across an expanded range of the electromagnetic spectrum, including infrared wavelengths, enabling detection of seal contamination with far lower contrast than conventional systems can resolve.\u003c\/p\u003e\n\n\u003ch3\u003eHyperspectral Imaging: Pixel-Level Material Analysis\u003c\/h3\u003e\n\u003cp\u003eHyperPointer® uses hyperspectral line scan cameras that examine each pixel individually across a broad wavelength spectrum. This pixel-level analysis detects variations in material composition even when inspecting through printed foil — a capability that is fundamentally beyond the reach of standard camera technology. The result is more accurate, more reliable seal contamination detection across a wider range of packaging formats and film types.\u003c\/p\u003e\n\n\u003ch3\u003eCompact In-Line Construction\u003c\/h3\u003e\n\u003cp\u003eHyperPointer® is built in a stainless steel enclosure measuring 1,150 × 630 × 1,680 mm (L × W × H, excluding shield), with a 300 mm conveyor width handling products up to 100H × 280W × 280D mm. The conveyor level sits at 900 mm with ±50 mm adjustment to suit existing line heights. Seal, label and artwork, print, and barcode inspection are all supported within the same unit.\u003c\/p\u003e\n\n\u003ch3\u003eIndustrial Computing and Open Connectivity\u003c\/h3\u003e\n\u003cp\u003eThe built-in industrial PC runs Windows 11 IoT Enterprise LTSC with TriVision’s vision software, presenting an intuitive operator interface on a 21.5-inch full HD multi-touch panel. OPC UA and REST communication protocols combined with Gigabit Ethernet and Digital I\/O provide straightforward integration with MES platforms and factory data systems across all supported languages.\u003c\/p\u003e\n\n\u003ch2\u003eReliable Inspection Beyond the Visible Spectrum\u003c\/h2\u003e\n\u003cp\u003eFor manufacturers handling non-transparent or printed packaging where standard vision systems cannot guarantee consistent seal quality, HyperPointer® provides the detection capability needed to maintain product integrity, reduce false rejects, and meet the demands of regulated food and pharmaceutical production environments.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56134971457858,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/HyperPointer_From_Right_High_800.png?v=1788790187"},{"product_id":"360-inspector®-360-inspector®-product-inspection-system","title":"360 Inspector® Vision Inspection System","description":"\u003ch2\u003e360 Inspector®: Full-Surround Vision Inspection for Bottles, Cans, and Jars\u003c\/h2\u003e\n\n\u003cp\u003eThe 360 Inspector® from TriVision is a vision inspection system designed for products that require complete all-round coverage — including bottles, cans, and jars. Equipped with eight high-performance cameras, the system delivers six-camera 360-degree side coverage combined with dedicated top and bottom inspection in a single pass, enabling accurate, detailed quality assessment across the full surface of each product.\u003c\/p\u003e\n\n\u003ch3\u003eComplete 360-Degree and Top-to-Bottom Coverage\u003c\/h3\u003e\n\u003cp\u003eSix cameras provide seamless 360-degree inspection of the product body, while two additional cameras inspect from above and below. This eight-camera configuration eliminates blind spots and ensures that label defects, print errors, barcode failures, dents, seam irregularities, and expiry date issues are captured regardless of their position on the product. The result is a significant reduction in false positives and negatives, and consistent identification of every critical defect.\u003c\/p\u003e\n\n\u003ch3\u003eWide Product Range and Configurable Design\u003c\/h3\u003e\n\u003cp\u003e360 Inspector® is available in multiple configurations and can be supplied with or without a conveyor, providing flexibility to suit different production line layouts. The system handles a wide range of product formats — from label verification on marmalade jars to structural defect detection on metal cans — making it a versatile platform for food, beverage, and consumer goods producers.\u003c\/p\u003e\n\n\u003ch3\u003eRobust Construction for Demanding Environments\u003c\/h3\u003e\n\u003cp\u003eThe camera housing is available in aluminium and PA as standard, with optional stainless steel AISI 316 for hygienic or washdown environments. The electrical cabinet is constructed from stainless steel AISI 304 or 316 and rated IP 66. Enclosure ratings of IP 65 as standard or IP 69K optionally ensure the system withstands demanding production conditions. Housing footprint is typically 1,000 × 1,000 mm, adjusted to suit the product range.\u003c\/p\u003e\n\n\u003ch3\u003eIndustrial Computing with Cloud Intelligence\u003c\/h3\u003e\n\u003cp\u003eRunning on Windows 11 IoT Enterprise LTSC with a compact industrial PC, 360 Inspector® provides intuitive operation via a 15.6-inch full HD multi-touch panel. OPC UA and REST communication protocols over Gigabit Ethernet enable integration with factory data systems, while cloud-based backup and Production Intelligence functionality deliver actionable quality data across production shifts and sites.\u003c\/p\u003e\n\n\u003ch2\u003eMaximum Efficiency for Round Product Inspection\u003c\/h2\u003e\n\u003cp\u003eBy combining eight-camera all-angle coverage, configurable hardware, and cloud-connected production intelligence, 360 Inspector® reduces downtime, minimises false rejects, and provides manufacturers with the inspection data needed to maintain consistent product quality at production speed.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56134981058882,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/360-Inspector_4-e1756820010251-768x0-c-default_800.png?v=1788868969"},{"product_id":"smartinspector®-machine-vision-inspection","title":"SmartInspector® Vision Inspection System","description":"\u003ch2\u003eSmartInspector®: Plug-and-Play Machine Vision for Any Packaging Line\u003c\/h2\u003e\n\n\u003cp\u003eThe SmartInspector® from TriVision is a compact, plug-and-play vision inspection system designed for straightforward installation on existing conveyors. Powered by TriVision’s intuitive vision software, SmartInspector® performs essential label and artwork, print, and barcode inspection across any type of packaging — with a minimal footprint and without requiring significant line modification or infrastructure investment.\u003c\/p\u003e\n\n\u003ch3\u003eSimple Installation on Existing Conveyors\u003c\/h3\u003e\n\u003cp\u003eSmartInspector® mounts directly onto existing conveyor infrastructure using brackets or stands, depending on shop floor conditions. The system is scalable and available in multiple sizes to accommodate different conveyor widths up to 340 mm, making it straightforward to deploy across a range of production line layouts without redesigning the line. A top camera is included as standard, with bottom and side camera configurations also available to extend inspection coverage where required.\u003c\/p\u003e\n\n\u003ch3\u003eEssential Inspection Across All Packaging Types\u003c\/h3\u003e\n\u003cp\u003eTriVision’s vision technology enables SmartInspector® to perform thorough label and artwork verification, print quality assessment, and barcode inspection across a wide range of packaging formats, handling products up to 150H × 280W × 280D mm at conveyor speeds up to 800 mm\/s. An optional mechanical pusher ejector mechanism can be added to automate rejection of non-conforming products directly on the line.\u003c\/p\u003e\n\n\u003ch3\u003eRobust Construction with a Minimalist Design\u003c\/h3\u003e\n\u003cp\u003eThe main structure is constructed from stainless steel AISI 316, with encapsulated parts in stainless steel AISI 304, housed in an 885H × 600W × 460D mm enclosure. The minimalist, scalable design keeps the installation footprint small while maintaining the build quality expected in food and pharmaceutical production environments.\u003c\/p\u003e\n\n\u003ch3\u003eIndustrial Computing and Open Connectivity\u003c\/h3\u003e\n\u003cp\u003eSmartInspector® runs on Windows 11 IoT Enterprise LTSC with an industrial PC, providing a familiar and stable operating environment. The 15.6-inch full HD multi-touch panel delivers an intuitive operator interface, while Gigabit Ethernet, Digital I\/O, OPC UA, and REST connectivity enable integration with factory data systems and MES platforms across all supported languages.\u003c\/p\u003e\n\n\u003ch2\u003eQuality Control Without Complexity\u003c\/h2\u003e\n\u003cp\u003eWith its scalable design, simple conveyor installation, and TriVision’s proven vision software, SmartInspector® gives manufacturers an accessible route to reliable, automated packaging inspection — without the cost, footprint, or complexity of a full standalone inspection unit.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56135159677250,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/SmartInspector.5_800.png?v=1788790203"},{"product_id":"visioone®-vision-inspection-system","title":"VisioOne® Vision Inspection System","description":"\u003ch2\u003eVisioOne®: Flexible Single-Camera Vision Inspection for Essential Packaging Applications\u003c\/h2\u003e\n\n\u003cp\u003eThe VisioOne® from TriVision is a compact, single-camera vision inspection system designed for essential label and packaging verification on existing production lines. Installing directly on top of an existing conveyor, VisioOne® provides swift, straightforward changeovers and an effective real-time overview of inspection data and production performance — without requiring significant line modification or infrastructure investment.\u003c\/p\u003e\n\n\u003ch3\u003eLabel, Print, and Barcode Inspection from Top and Side\u003c\/h3\u003e\n\u003cp\u003eVisioOne® performs label and artwork verification, print quality assessment, and barcode inspection of both primary and secondary packaging. Top and side inspection configurations are supported, enabling coverage of label position, artwork accuracy, expiry dates, and barcode readability across a range of packaging formats. Compliance documentation and detailed production statistics are generated automatically, supporting quality assurance and audit requirements.\u003c\/p\u003e\n\n\u003ch3\u003eQuick Changeovers and Flexible Installation\u003c\/h3\u003e\n\u003cp\u003eThe system is designed for fast and easy format changeovers, minimising downtime during product transitions. Customised brackets and shielding are available for specific packaging line layouts, and an optional ejection unit can be added to automate rejection of non-conforming products. The complete system includes camera, lighting, housing, cabinet with all electrical components, and operator panel as standard.\u003c\/p\u003e\n\n\u003ch3\u003eMaterial Options for Any Environment\u003c\/h3\u003e\n\u003cp\u003eVisioOne® components are available in multiple materials to suit different production environments. The camera housing is aluminium and PA as standard (IP 67), with optional stainless steel AISI 316 and IP 69K rating for washdown conditions. The electrical cabinet is powder-coated sheet steel as standard (IP 66), with optional stainless steel AISI 304 or 316 for hygienic environments.\u003c\/p\u003e\n\n\u003ch3\u003eCompact Computing with Cloud Intelligence\u003c\/h3\u003e\n\u003cp\u003eA compact PC running Windows 11 IoT Enterprise LTSC powers the system, with operator interaction via a 12-inch full HD multi-touch panel. OPC UA and REST communication over Gigabit Ethernet and USB enable integration with factory data systems, while cloud-based backup and Production Intelligence provide actionable quality and performance data across production shifts.\u003c\/p\u003e\n\n\u003ch2\u003eEssential Inspection, Simply Delivered\u003c\/h2\u003e\n\u003cp\u003eWith its single-camera simplicity, flexible material options, and TriVision’s proven software, VisioOne® offers an effective, low-footprint route to reliable label and packaging inspection for manufacturers seeking essential quality control without operational complexity.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56135220363586,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/VisioOne_PNG_800.png?v=1788791786"},{"product_id":"cheeseinspector®-rectangular-vision-inspection-system","title":"CheeseInspector® Rectangular Vision Inspection System","description":"\u003ch2\u003eCheeseInspector® Rectangular: Automated All-Sides Inspection of Rectangular Cheese Blocks\u003c\/h2\u003e\n\n\u003cp\u003eThe CheeseInspector® Rectangular from TriVision automates the quality control of rectangular cheese blocks, delivering complete surface inspection across all sides in a single pass. Powered by TriVision’s leading vision technology, the system reliably detects mould spots and plastic or foil residues on the entire cheese surface, ensuring product compliance and protecting brand integrity at throughput rates of up to 15 blocks per minute.\u003c\/p\u003e\n\n\u003ch3\u003eComplete Surface Inspection Across All Sides\u003c\/h3\u003e\n\u003cp\u003eCheeseInspector® Rectangular inspects every face of the cheese block — top, bottom, and all four sides — detecting mould spots and foil residues regardless of their position on the surface. The system accommodates rectangular blocks in different formats and sizes, providing consistent, repeatable inspection performance across a range of product SKUs without requiring extensive format-change procedures.\u003c\/p\u003e\n\n\u003ch3\u003eHigh Throughput with Reliable Failure Detection\u003c\/h3\u003e\n\u003cp\u003eWith a capacity of up to 15 blocks per minute depending on block size and shape, CheeseInspector® Rectangular maintains production throughput while eliminating manual visual inspection. Combined with TriVision’s reliable detection algorithms, the system reduces the risk of non-conforming product reaching downstream packing or retail channels, delivering a fast return on investment without compromising product quality.\u003c\/p\u003e\n\n\u003ch3\u003eCompact Turnkey Construction\u003c\/h3\u003e\n\u003cp\u003eCheeseInspector® Rectangular is a complete turnkey solution comprising a built-in conveyor, vision system, and a separate electrical cabinet with HMI panel — all in a minimal footprint. The compact design simplifies installation into existing dairy production lines and reduces the space and infrastructure required compared to multi-unit inspection setups.\u003c\/p\u003e\n\n\u003ch3\u003eIndustry 4.0 Connectivity and Production Intelligence\u003c\/h3\u003e\n\u003cp\u003eThe system is Industry 4.0-ready, supporting multiple communication protocols and MES\/ERP connectivity for seamless integration with factory data infrastructure. An intuitive HMI provides real-time overview of quality data and production performance, while cloud-based backup and the Production Intelligence tool enable trend analysis, root cause investigation, and performance benchmarking across shifts and production sites.\u003c\/p\u003e\n\n\u003ch2\u003eAutomated Cheese Quality Control at Production Speed\u003c\/h2\u003e\n\u003cp\u003eBy combining all-sides surface inspection, high throughput capacity, and cloud-connected production intelligence in a single compact unit, CheeseInspector® Rectangular gives dairy manufacturers the tools to automate quality assurance, reduce labour dependency, and maintain consistent product standards at scale.\u003c\/p\u003e","brand":"TriVision","offers":[{"title":"Default Title","offer_id":56135236682050,"sku":null,"price":0.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0745\/6800\/8002\/files\/CheeseInspector_without_background_scaled_800.png?v=1788790169"}],"url":"https:\/\/www.womag.co.uk\/collections\/vision-inspection-systems-copy.oembed","provider":"Womag","version":"1.0","type":"link"}